CYC 42 Tooth Sprocket and Chainring Cover
For use on your existing 38-50 T Chainring Adapter. Must use 2-prong tool that came with your kit to remove and install.
Specifications:
- 42 Tooth Sprocket
- Chainring Cover
-
-
The CYC eBike Headlights are ideal for night rides. With high and low beam lights, you can ride comfortably in lowlight situations. Includes:- eBike low & high beam headlights
- 2x mounting sets for each light
- Bolts & hex keys needed
-
- Connector = XT-90 male & female connector
- Compatibility = X1 Stealth, X1 Pro, & Photon kits
- Power consuption = 18W per bulb
- Supported Voltages = 36V to 72V nominal voltage
- See full description for details.
-
ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:- Left & Right side crank arm
- Length Options: 165mm or 175mm
- Material = 7075-t6 aluminium
- Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, Photon
-
CYC Photon Chainring Set This is the complete set needed to change or replace the CYC Photon chainring, select from 34 Tooth, 38 Tooth, 42 Tooth or 50 Tooth. Includes:- Starfish adaptor
- Chainring
- Aluminum chainring cover
-
Sale!
Looking for an easy-change, worry-free Battery Charger? Take a look at this sleek HD Case, which includes a circulation fan to keep the charger cooler - for a longer life. 84V 3A Lithium Battery Charger for 72V Li-ion Ebike XT60 Connector - 110v -
The SW102 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's convenient formfactor leaves you with plenty of space on your handlebars. Plug-n-play ready. Includes:- SW102 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 1.3”OLED（64*128pixels）
-
The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:- DS103 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 3.5” colored TFT (480*320pixels)
-
Buy 2 Battery Packs,Get this FREE!(limited-time offer, hurry while supplies last)Dual Battery Parallel Module - brought to you by Bicycle Motor Works20-72v, 120 ampsNow you can safely run two battery packs in parallel. Double your current, double your range, double you fun!Size of module: 63mm x 78mm x 25mmIf you don’t already know, without a protective circuit there are many dangers to using two battery packs in parallel in order to increase your range. This smart module eliminates those dangers, and it allows you to easily and safely combine two packs of the same nominal voltage.When the packs are at the same voltage level, the module will draw equally from each pack to power your motor. If the packs are at different voltage levels, the module will draw on the higher voltage pack until the voltage levels become equal. At that point both packs will be combined to power your motor.Use two battery packs of equal nominal voltage. You can combine two packs of different capacity (ie: 10ah + 15ah)See full description. -
CYC Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon CoverFor Gen 3 X1 Stealth and X1 Pro only. Includes HD Freewheel and Torque Sensor for easy replacement. -
NEW X12 Controller - 5,000 Watts!
Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
Swap your X1 Pro Gen 3
with the X1 Pro Gen 4 Motor (includes the NEW X12 Controller - 5,000 Watts)!
- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
-
52v Mini, Water-Resist Case - Custom Designed by Lekkie 4 Certified Premium Cell Varieties, Copper Busbars Made in the U.S., built with pride.Like all of our packs, these new packs are built with pride in our Bethlehem, PA facility. We don’t just trust that an overseas manufacturer uses the correct and genuine cells - we ARE the manufacturer so we KNOW exactly what quality, high current packs requires to perform.
*** Please read full description for details
