-
The CYC eBike Headlights are ideal for night rides. With high and low beam lights, you can ride comfortably in lowlight situations. Includes:
- eBike low & high beam headlights
- 2x mounting sets for each light
- Bolts & hex keys needed
-
- Connector = XT-90 male & female connector
- Compatibility = X1 Stealth, X1 Pro, & Photon kits
- Power consuption = 18W per bulb
- Supported Voltages = 36V to 72V nominal voltage
- See full description for details.
-
Sale!USA Made eBike Battery HIGH Current 14S 4P pack Molicel P45B Series, 21700 cells16.8 amp hours!936 Watt Hours!!Dimensions are approx. 12.25” x 4.25” x 3”Each cell is rated to handle 35 amp continuous output! Built using a 60 amp continuous BMS for HIGH POWER applications.This pack can put out 60+ amps all day without overheating. Great for BBSHD Ludicrous setups as well as BBSHD BAC ASI setups. Output wires are 10AWG silicone
-
Sale!
eBike Battery – HIGH Current 14S 3P pack with Molicel P42A 21700 cells!
12.6 amp hours!!
Dimensions are approx 12.25” x 3.3” x 3”
Each cell is rated to handle 35 amp continuous output! Built using a 60 amp continuous BMS for HIGH POWER applications.
This pack can put out 60+ amps all day without overheating. Great for ALL CYC motors, BBSHD Ludicrous setups as well as BBSHD BAC ASI setups. Output wires are 10AWG silicone.
-
Sale!NEW COLLECTION Super Pack - The ultimate 52v high current, long range pack - available in your choice of premium cells.
Like all of our packs, these new packs are built with pride in our Bethlehem, PA facility. We don’t just trust that an overseas manufacturer uses the correct and genuine cells - we ARE the manufacturer so we KNOW exactly what quality, high current packs requires to perform.
*** Please read full description for details
-
The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:
- DS103 display
- Nominal Voltage = 36-52V
- Waterproof = IP65
- Controller Compatibility = X6P, X6, & X12
- Operating temperature = -20°C to 60°C
- Screen specification = 3.5” colored TFT (480*320pixels)
-
Sale!
Premium Electric Bike Battery with an awesome new design for high power mid drives.
** 90 amp continuous, 120 amp burst BMS!
- Molicel P45B cells (3P) are rated to handle 135 amps continuous
- US Made, Protected, Safely Sealed and Shipped
Please read the full description. Lithium Ion batteries can be dangerous.
-
Sale!Our Ebike batteries are made in the USA, custom built, premium cells, quality design, safely sealed and secured. Highlights Include: Lots of range, longer battery life, custom designed and full customer service.
-
CYC Speed Sensor and Bluetooth Module (X6 and X12 only)NOTE: This is for the X6 and X12 ControllerThe CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel. This unit also houses the Bluetooth control module that is needed to connect to the CYC Ride Control app.- 7 Pin Male Connector- Includes Magnet- Installation GuidePlease read full description
-
Sale!eBike Battery – HIGH Current 14S 3P pack with Molicel P45B 21700 cells!
13.5 amp hours!!
Dimensions are approx 12.25” x 3.3” x 3”
Each cell is rated to handle 35 amp continuous output! Built using a 60 amp continuous BMS for HIGH POWER applications.
This pack can put out 60+ amps all day without overheating. Great for ALL CYC motors, BBSHD Ludicrous setups as well as BBSHD BAC ASI setups. Output wires are 10AWG silicone.
-
ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:
- Left & Right side crank arm
- Length Options: 165mm or 175mm
- Material = 7075-t6 aluminium
- Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3, Photon
-
Sale!Be warm. Support Bicycle Motor Works and sport this ultra soft Sweatshirt in style while you ride.
-
CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
- 1-4 wiring harness
- Thumb throttle/ full twist throttle/ half-twist throttle (optional)
- Magnetic brake sensors (optional)
-
NEW X12 Controller - 5,000 Watts!
Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!- Runs 36v-72v eBike Batteries
- 8 Gauge Phase Wires
- The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
- Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.