• Buy 2 Battery Packs,
    Get this FREE!
    (limited-time offer, hurry while supplies last)
    Dual Battery Parallel Module - brought to you by Bicycle Motor Works
    20-72v, 120 amps
    Now you can safely run two battery packs in parallel.  Double your current, double your range, double you fun!
    Size of module: 63mm x 78mm x 25mm
    If you don’t already know, without a protective circuit there are many dangers to using two battery packs in parallel in order to increase your range.  This smart module eliminates those dangers, and it allows you to easily and safely combine two packs of the same nominal voltage.
    When the packs are at the same voltage level, the module will draw equally from each pack to power your motor.  If the packs are at different voltage levels, the module will draw on the higher voltage pack until the voltage levels become equal.  At that point both packs will be combined to power your motor.
    Use two battery packs of equal nominal voltage. You can combine two packs of different capacity (ie: 10ah + 15ah)
    See full description.
     
  • CYC 42 Tooth Sprocket and Chainring Cover
    For use on your existing 38-50 T Chainring Adapter.  Must use 2-prong tool that came with your kit to remove and install.
    Specifications:
    • 42 Tooth Sprocket
    • Chainring Cover
    Please see full description
  • CYC 1 to 1 Wiring Harness The 1 to 1 wiring harness connects your CYC Photon controller to the display. When using display only without a throttle.  Keeps wiring slim and clean. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-1 wiring harness
    Please see full description
     
  • Photon Chainring Set

    $60.00$130.00
    CYC Photon Chainring Set  This is the complete set needed to change or replace the CYC Photon chainring, select from 34 Tooth, 38 Tooth, 42 Tooth or 50 Tooth. Includes:
    1. Starfish adaptor
    2. Chainring
    3. Aluminum chainring cover
    Please see full description.
     
  • CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-4 wiring harness
    • Thumb throttle/ full twist throttle/ half-twist throttle (optional)
    • Magnetic brake sensors (optional)
    Please see full description
     
  • CYC 1 to 2 Wiring with Throttle Upgrade Option The 1 to 2 wiring harness connects your controller to the display and the throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-2 wiring harness
    •  Optional Upgrade: Thumb throttle/ Full twist throttle/ Half-twist throttle
    Please see full description
     
  • CYC Magnetic Break Sensors Includes: 2x magnetic brake sensors & 2x magnets. Installation guide provided. Not compatible with X1 Pro Gen 1. Please see full description
     
  • CYC Gen 3 Stealth and X1 Pro controller Mounting Bracket
    Installation Guide provided, please full details.
     
  • Gen 3 Stealth and X1 Pro Controller Extension Wires
     
  • CYC Nylon Bearing Covers - Pair
     
  • CYC Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon Cover
    For Gen 3 X1 Stealth and X1 Pro only.  Includes HD Freewheel and Torque Sensor for easy replacement.
     
  • CYC Speed Sensor and Bluetooth Module (X6 and X12 only) 
    NOTE: This is for the X6 and X12 Controller
    The CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel.  This unit also houses the Bluetooth control module that is needed to connect to the CYC Ride Control app.
    - 7 Pin Male Connector
    - Includes Magnet
    - Installation Guide
    Please read full description
     
Go to Top