FacebookInstagramYouTubeLinkedIn
  • A black cable with green light on it. A black cable with green light on it.

    CYC 1 to 1 Wiring Harness

    $12.00
    CYC 1 to 1 Wiring Harness The 1 to 1 wiring harness connects your CYC Photon controller to the display. When using display only without a throttle.  Keeps wiring slim and clean. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-1 wiring harness
    Please see full description
     
    Add to cart Details
  • A black cable with an electric wire attached to it. A black cable with an electric power cord attached to it.

    CYC 1 to 2 Wiring with Throttle Option

    $20.00 – $35.00
    CYC 1 to 2 Wiring with Throttle Upgrade Option The 1 to 2 wiring harness connects your controller to the display and the throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-2 wiring harness
    •  Optional Upgrade: Thumb throttle/ Full twist throttle/ Half-twist throttle
    Please see full description
     
    Select options Details
  • A pair of black and silver electronic hand grips. A black cord with two red wires and a black ring.

    CYC 1 to 4 Wiring with Throttle and Brake Sensor Option

    $25.00 – $40.00
    CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-4 wiring harness
    • Thumb throttle/ full twist throttle/ half-twist throttle (optional)
    • Magnetic brake sensors (optional)
    Please see full description
     
    Select options Details
  • A group of different types of rings sitting on top of each other. A group of nine black plastic gears on top of each other.

    CYC 42 Tooth Sprocket and Chainring Cover

    $40.00
    CYC 42 Tooth Sprocket and Chainring Cover
    For use on your existing 38-50 T Chainring Adapter.  Must use 2-prong tool that came with your kit to remove and install.
    Specifications:
    • 42 Tooth Sprocket
    • Chainring Cover
    Please see full description
    Add to cart Details
  • A black cord with an orange end and a white button A black cord with an orange end and a white button

    CYC Magnetic Brake Sensors

    $23.00
    CYC Magnetic Break Sensors Includes: 2x magnetic brake sensors & 2x magnets. Installation guide provided. Not compatible with X1 Pro Gen 1. Please see full description
     
    Add to cart Details
  • A pair of black plastic rings sitting on top of each other. A pair of black plastic cups sitting on top of each other.

    CYC Nylon Bearing Covers – Pair

    $8.00
    CYC Nylon Bearing Covers - Pair
     
    Add to cart Details
  • A black disk with a nut and screw on it. A black metal disc with nuts and bolts on top.

    CYC Photon Chainring Removal Tool

    $18.00
    CYC PHOTON Chainring Removal Tool

    Finally available, the tool you’ve been waiting for!  Securely plug in this 5-pronged tool to your center chainring retention ring to remove and install your chainring assembly.  You can now easily switch between chainring sizes without contacting customer support for help.

    • Full 360 degree contact - means no slipping.
    • Built-in nut accepts a 22mm socket (or 7/8” if you must).
    • Use an actual torque wrench for worry-free installs.
    • Available in any color you want, as long as it’s black.
    • Compatible with your CYC Photon eConversion System.
    Please see full description.
     
    Add to cart Details
  • Bicycle Motor Works -eBike Kits

    CYC X1 Pro Gen 4 Motor

    $293.00

    Swap your X1 Pro Gen 3

    with the X1 Pro Gen 4 Motor (includes the NEW X12 Controller - 5,000 Watts)!

    • Runs 36v-72v eBike Batteries
    • 8 Gauge Phase Wires
    • The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
    • Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
    Please read full description.  
    Add to cart Details
  • Bicycle Motor Works

    CYC X12 Controller

    $288.00

    NEW X12 Controller - 5,000 Watts!

    Be the first to receive the new, long awaited X12 Controller for a direct swap out on your X1 Pro Gen 3!
    • Runs 36v-72v eBike Batteries
    • 8 Gauge Phase Wires
    • The X12 Controller is a direct replacement for CYC X6 Controller on X1 Pro Gen 3 setups. DO NOT USE on CYC Stealth Motors!
    • Same measurements as the X6 Controller, EXCEPT it is only 70mm longer. Mounts inside the same brackets of the X1 Pro Gen 3.
    Please read full description.  
    Add to cart Details
  • A black device with a green light on it. A tablet and charger on a table.

    DS103 Display

    $95.00
    The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:
    • DS103 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 3.5” colored TFT (480*320pixels)
    Please see full description.  
    Add to cart Details
  • Two red and one gray plastic discs on a white background A pair of black and red rubber washers.

    eBike Aluminum Cover Replacement

    $20.00
    CYC Aluminum Cover Replacement for your CYC X1 Pro eBike.
    • Aluminum cover replacement for original glass cover. Compatible with X1 Pro
    Please see full description.  
    Add to cart Details
  • A pair of black and silver handles with a wire. A pair of black and silver jump ropes with an orange cable.

    eBike Full Twist Throttle

    $18.00
    CYC Full Twist Throttle: for your CYC X1 Stealth, Pro or Photon ebike. Includes 1x full twist throttle and matching grip Motor compatibility: X1 Pro, X1 Stealth and Photon Controllers compatibility: BAC855, BAC2000, X6, and X12 Please see full description.  
    Add to cart Details

Title

A bicycle motor works logo with the words " build it. Ride it."
Support
Explore
Products

© Copyright 2013 - 2015 | Bicycle Motor Works operated by GutenMarkt, Inc.

Go to Top