• The SW102 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's convenient formfactor leaves you with plenty of space on your handlebars. Plug-n-play ready. Includes:
    • SW102 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 1.3”OLED(64*128pixels)
    Please see full description.  
  • The DS103 display with CYC specific firmware is integrated with the controller and the CYC Ride Control mobile app. It's easy-to-read formfactor gives you all the stats you'll need on the go. Plug-n-play ready. Includes:
    • DS103 display
    Specifications:
    • Nominal Voltage = 36-52V
    • Waterproof = IP65
    • Controller Compatibility = X6P, X6, & X12
    • Operating temperature = -20°C to 60°C
    • Screen specification = 3.5” colored TFT (480*320pixels)
    Please see full description.  
  • CYC Retaining Lock Ring, for you Gen 3 models. Includes: 1x Left Retaining Lock Ring Compatible with CYC X1 Gen 3 ISIS splined spindle only.13 Please see full description.  
  • ISIS Crank Arm Set, for your CYC Gen 3 and Photon CYC's ISIS crank arm set is a 5 degrees off-set, made to be paired with the Gen 3 and Photon kits. Ride with confidence knowing that your cranks won't give in even in extreme terrains. Includes:
    • Left & Right side crank arm
    • Length Options: 165mm or 175mm
    Specifications:
    • Material = 7075-t6 aluminium
    • Compatibility = X1 Pro Gen 3, X1 Stealth Gen 3,  Photon
    See full description.  
  • CYC Speed Sensor and Bluetooth Module (X6 and X12 only) 
    NOTE: This is for the X6 and X12 Controller
    The CYC speed sensors reads your speed via pulses detected from the speed sensor magnet as it moves with your wheel.  This unit also houses the Bluetooth control module that is needed to connect to the CYC Ride Control app.
    - 7 Pin Male Connector
    - Includes Magnet
    - Installation Guide
    Please read full description
     
  • CYC Right Bottom Bracket Cup with Gen 3 Freewheel and Torque Sensor Assembly with Nylon Cover
    For Gen 3 X1 Stealth and X1 Pro only.  Includes HD Freewheel and Torque Sensor for easy replacement.
     
  • CYC Nylon Bearing Covers - Pair
     
  • Gen 3 Stealth and X1 Pro Controller Extension Wires
     
  • CYC Gen 3 Stealth and X1 Pro controller Mounting Bracket
    Installation Guide provided, please full details.
     
  • CYC Magnetic Break Sensors Includes: 2x magnetic brake sensors & 2x magnets. Installation guide provided. Not compatible with X1 Pro Gen 1. Please see full description
     
  • CYC 1 to 2 Wiring with Throttle Upgrade Option The 1 to 2 wiring harness connects your controller to the display and the throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-2 wiring harness
    •  Optional Upgrade: Thumb throttle/ Full twist throttle/ Half-twist throttle
    Please see full description
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
  • CYC 1 to 4 Wiring with Throttle Upgrade and Brake Sensor Option The 1 to 4 wiring harness connects your controller to the display, brake sensors, and throttle. The waterproof connectors ensure that they are equipped for outdoor use in any terrain. Includes:
    • 1-4 wiring harness
    • Thumb throttle/ full twist throttle/ half-twist throttle (optional)
    • Magnetic brake sensors (optional)
    Please see full description
     
    Select options This product has multiple variants. The options may be chosen on the product page Details
Go to Top